The edition of ANSI Standard A presented the first criteria for requirements and identify changes from the edition. . ICC/ANSI A 31 Jul LEGALLY BINDING DOCUMENTUnited States of AmericaAll citizens and residents are hereby advised that this is a legally binding document. Trademarks: “ICC,” the International Code Council logo and “Accessible and Usable Buildings and Facilities (ICC/ANSI Al )” are trademarks of the.
|Published (Last):||14 September 2008|
|PDF File Size:||14.11 Mb|
|ePub File Size:||5.92 Mb|
|Price:||Free* [*Free Regsitration Required]|
Standards Subsctiption may be the perfect solution. Lifts with doors or gates shall com- ply with Section 41 0. The slope that is parallel to the direction of travel see cross slope.
The height of water closet seats shall be 11 inches mm minimum and 17 inches mm maximum above the floor, measured to the top of the seat. Control buttons shall be raised or flush.
Text descriptors shall comply with Sections Toilet compartment doors, including door hardware, shall comply with Sec- a Wall-Hung Water Closet – Adult tionexcept if the approach is to the latch side of the compartment door the clearance between the door side of the compartment and any obstruction shall be 42 inches mm minimum.
In existing elevators, a signal indicat- ing the direction of car travel shall not be required. Equipment that employs interactive, text-based communica- tions through the transmission of 203 signals across the standard telephone network. Where doorways are adja- cent to a ramp landing, maneuvering clearances required by Sections The force required to activate operable parts shall be 5. Elevator car and hoistway doors and gates shall comply with A117.
Unless otherwise specified, clear floor space shall be permitted to include knee and toe clearance complying with Section Side door clear opening width shall be 42 inches mm minimum. Stair treads shall comply with Section and shall have a slope not steeper than 1: The audible signal shall be activated by anwi a function button.
Standards Subscriptions from ANSI provides a money-saving, multi-user solution for 200 standards.
Table of Contents | ICC/ANSI A – | ICC premiumACCESS
Grab bars shall be provided on the rear wall and ansk the icd wall closest to the water closet. The exit door discharging to the outside or to the level of exit discharge shall have a tactile sign stating “EXIT. The down scan button shall sequentially select floors below the current floor. Car doors that provide a clear opening anei of 36 inches mm mini- mum shall be permitted to be located on adja- cent sides of cars that provide a clear floor area of 51 inches mm in width and 51 inches mm in depth.
Clear floor space of plat- form lifts shall comply with Section General Site and Building Elements 20 feet min 60 min area to be a171.1 Fig. A fixed shower head with the con- trols and shower head located on the back wall opposite the seat shall be permitted. The side edge of the seat shall be 1 7 2 inches 38 mm maximum from the back wall of a transfer-type shower and 1 7 2 inches 38 mm maximum from the control wall of a roll-in-type shower.
ANSI A117.1 (2003): Accessible and Usable Buildings and Facilities
Any slope opposing the running slope of a curb ramp. Audible signals shall have a frequency of Hz maximum.
The International Symbol of Accessibil- ity shall comply with Figure A seat shall be provided in an alternate roll-in-type shower compartment. The audi- ble signal or verbal annunciator shall be 10 dBA minimum above ambient, ucc shall not exceed 80 dBA, measured at the hall call but- ton.
ICC/ANSI A – Accessible and Useable Buildings and Facilities
The telephone handset shall be capable of being placed flush on the surface of the shelf. Grab bars shall not rotate within their fittings. Numbers shall be permit- ted to be omitted, provided the remaining numbers are in sequence.
Each operable part shall be able to be differentiated by sound or touch, without acti- vation. Lifts serving two landings maxi- mum and having doors or gates on opposite sides shall be permitted to have self-closing manual doors or gates.
20033 slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp xnsi not be steeper than 1: Door surfaces within 10 inches mm of the floor, measured vertically, shall be a smooth surface on the push side extending the full width of the door.